• Times races with up to 10 lanes
• Times road races with up to 8,000 participants
• 8,000 multiple event memory
• Prints bib number, lane, place, and time
• Time and calendar
• Includes linkgate eliminating tangled cords to timer
• Compatible with Hytek, RunScore and Easy Meet Manager
• Includes Windows interface
• Includes 8 lane buttons and 2 rolls of paper
• 2 Year warranty

• 8,000 memory for individual finishers in single or multiple events
• Store multiple events in memory for later review or printing
• Four digit bib numbers
• Bib number entry at finish or add/edit after event
• Four digit place counter
• Automatic print out during event
• Final result print out after event
• Single and multiple start times
• Up to 10 waves in multiple start race

• Up to 10 lap/split lane buttons
• Linkgate allows single wire to lane timer, eliminating tangled wires
• 8,000 dual split memory for single or multiple events
• Store multiple events in memory for later review or printing
• Four digit place counter
• Pre-entry of bib and lane numbers
• Bib number add/edit after event
• Two digit lap counter
• Test mode for verification of lane set-up

• Prints 20 digits, 1 lap/split record per line
• Printing speed of 1 line per second
• Automatic printout of date, run number and record type (track, road or multiple)
• Pause printing function allows for paper change
• Powered by rechargeable internal battery; recharged by USB

• 3 rolls per box
• Each roll prints 1200 lines
• For Ultrak L10 Timer

• 3 rolls per box
• Each roll is 396 inches long and prints 2500 lines
• For Seiko S149 Stopwatch

• 5 rolls per box
• Each roll is 80 inches long and prints 520 lines

• Four sections of 1/4" x 1 1/2" flat powder coated steel
• Designed to be mounted on top of concrete surface
• Anchor bolts included
• Compatible with toeboards 359 and 364
• Meets NFHS specifications

• Three sections of 1" x 3/4" extruded aluminum angle
• Designed to be mounted on top of concrete surface
• Anchor bolts included
• Compatible with toeboards 359 and 364
• Meets NFHS specifications

• Use for either hammer or indoor throwing weights
• Economical way to add variable weight to your training without buying more implements
• Comprised of five 0.5lb weights providing a weight range of 0.5lb - 2.5lbs

• Molded low density polyethylene designed for surface mount shot circles
• Fabricated with a low density polyethylene
• Compatible with 372 aluminum shot circle and 373 steel shot circles
• Meets NFHS specifications

• Molded low density polyethylene designed for 3/4" depressed surface
• Fabricated from low density polyethylene with a wal lthickness of 1/4"
• Compatible with 366, 369, and 374 shot circles, and 3741 form
• Meets NFHS, NCAA, and World Athletics specifications

Molded rubber construction with inner support tubing lasts through tough games and practices. Can be periodically rotated for use over multiple seasons.

Sturdy hard rubber base designed to withstand the battering of cleats. Runners sliding into home won't dislodge the base thanks to the included anchor, while the beveled edges prevent cleats or uniforms from snagging during the slide.

• Aluminum grip
• World Athletics approved

This set of four pylons is the ideal product for marking the end zone on all fields. Bottom weighted markers require no additional hardware to install, and will move when an athlete comes in contact. Meets all NCAA and NFHS rules, and are covered in UV treated, fluorescent orange vinyl. Extra strength double stitched seams.

Includes (2) pneumatic tires and support bracket assemblies. Attaches to back of a single field hockey goal so user can tip and roll the goal on and off the field.

• Powr-Select net antenna assemblies designed with unique molded plastic clamps with a screw type mechanism for securing to the top and bottom net hems from the floor without the aid of a chair or stepladder, or any tools
• 6' single unit construction assures there are no loose parts, which may be disassembled or lost
• 3/8" diameter antenna made of high tensile strength, extruded fiberglass material
• Meets NFHS, NCAA, FIVB, USAV competition requirements

• Highly-visible yellow vinyl with tough, durable Kevlar top cable
• 4" Square black ployester knotless netting
• 3" Wide top and bottom band
• Three nylon tensioning straps for a taut fit
• Measures 27' 10" x 3'3"

• 20' x 30" net made of #6 black treated cotton with 1" square mesh
• Net tie off cords with sufficient length for use on volleyball standards with 36’ centers
• Net can also be used for pickleball

42' x 39" Competition Tennis Net. Compatible with the Gill Essentials and Gill Elite Tennis Systems.

Designed to store chalk during practice and competition. This lightweight stand features a wide opening for hands, a pocket for extra chalk, and rungs for hanging accessories or resting vaulting poles.

• "50"" wide by 21"" tall with a 1"" grip diameter
• Bar is 22"" away from wall
• 48"" mounting centers
• Black powder coat finish
• Estimated load rating is 350lbs
• Hardware not included"

• 32' x 39" net made of high quality 4" square, #24 black nylon mesh
• 2" wide, vinyl coated polyester hem double stitched around entire perimeter of net
• Top cable is 44' long galvanized aircraft cable with nylon coating
• Spring loaded instant net tensioning device with pull handle for proper tensioning of the bottom rope
• Meets USAV, NCAA and NFHS requirements
• Compatible with 851 Economy volleyball standards

• Great choice for physical education and intramural activities
• Heavy black polyester mesh treated for longer life in either indoor or outdoor use
• Reinforced top binding with 45’ long black poly rope with 3’ long tie cords to provide net tension

Stencil kit provides ease of painting official court lines on asphalt or other surfaces in only minutes. Stencil sections are easily taped in place while paint is applied through the stencil holes using a roller provided with kit. Paint not included.

Singles Stick Net Support for Gill Tennis Systems.

Protective padding for volleyball net tensioners. Available in white only

The ST1 Sports Tetherball Post is designed for facilities and backyards that need a durable, long-lasting pole that holds up through intense matches, heavy player use, and year-round outdoor exposure. Galvanized steel construction resists rust and corrosion season after season, making it a reliable one-time investment for any outdoor tetherball setup.

• • Heavy-Gauge Galvanized Steel Construction – 2-3/8" O.D. round steel pole is hot-dip galvanized for superior rust and corrosion resistance, standing up to constant outdoor exposure, humidity, and heavy playground wear without deteriorating over time
  • Official 10' Above-Ground Height – Stands 10 feet above the playing surface when properly installed, aligning with standard tetherball play dimensions used on school playgrounds and recreational facilities for consistent, regulation-height gameplay
  • 2' In-Ground Installation for Maximum Stability – Pole inserts 2 feet below the surface into a concrete footing, providing a firm, immovable base that handles the lateral forces of hard strikes and wraparound rope tension without wobbling or shifting
  • Two-Piece Design for Easy Installation – Two-piece pole sections connect cleanly for straightforward setup and allow the pole to be transported and installed without heavy equipment or specialized tools
  • Ground Sleeve Compatible – Works with an optional ground sleeve for semi-permanent installations, allowing the post to be removed for storage during off-season periods or when the court needs to serve other purposes
  • Includes Swivel Hook and Lead Chain – Comes with a lead chain and snap swivel at the top for quick, secure attachment of the tetherball rope, eliminating the need for additional hardware to complete the setup; ball sold separately